True to form for DeWalt, Poseidon features tough-as-nails full-grain leather uppers. These feature a heavy wax finish, which not only forms an effective hydrophobic barrier, but also adds to the extreme longevity these boots are famous for. But with Poseidon, durability goes hand-in-hand with comfort. When it comes to your safety, nothing less than the best will do. You need the most durable materials, the best construction, and hard-wearing designs that will meet or exceed the safety standards your workplace demands.

Regularly condition the leather. Every few weeks, you’ll want to apply some wax or oil conditioner to the leather uppers to keep them supple and strong. You should do this immediately after cleaning.

So, the Titanium’s rugged, but that’s nothing if it doesn’t protect your feet. But that it does exceedingly well, with steel in both the toe cap and embedded within the PU midsole. As an American boot, it conforms with that country’s safety standards with full ASTM compliance, rating well vs. impact, compression, and electrical hazards. (This is equivalent to Europe’s EN 345 standard). Titanium at a glance You have a legal obligation to take reasonable care of the goods while they are in your possession. If you fail to comply with this obligation, we may have a right of action against you for compensation. This applies to all goods that are returned. Polyurethane is an organic polymer, and a common alternative to EVA midsoles. Unlike its softer counterpart, PU retains no shape memory, and doesn’t really compress much. While this is a less comfortable, less cushioning material, it’s far more durable. TPU Direct attach – With the direct attach method, a mould is made to fit the underside of the uppers. This mould is then filled with a molten rubber, which hardens with the uppers embedded inside. More durable than cement but less durable than a welt, this is a good midrange option that allows for superior stability and mobility.

The primary advantages are enhanced electrical resistance, greater thermal insulation, and invisibility to metal detectors. Of course, TPU also makes for a much lighter, more walkable boot for those of you who need to hoof it several miles per day. Inside, your feet will enjoy maximum comfort thanks the layering of dual-density PU/memory foam insole upon EVA midsole. What’s more, the insole is anti-bacterial, helping you stave off athlete’s foot, fungus, and other nasty afflictions of busy feet. The Apprentice also helps you keep stable with a TPU heel support. All together, these features work to absorb the energy of impact from your feet hitting the ground, helping you work longer hours with less pain. DeWalt Apprentice at a glance The FS7 has a durable steel toe cap, and unlike the Holtons, there is extensive mid-sole support here. The lacing structure reduces pressure points on the ankle but offers the required support at the same time. Outsole – This is, apart from the uppers, the most visible part of the boot, and certainly the most rugged. They’re typically made from PVC or proprietary rubber compounds, and are primarily designed to provide grip, alongside resistance to electricity and chemicals.The 100% leather upper on the Holton boots is flexible, but it does offer additional ankle support (being higher than most) in comparison to your average trade boots. Comfort is further amplified thanks to the Flex sole and padded tongue and collar. If you have ankle problems, or work on rough terrain where it’s easy to twist or roll your ankle, you’ll be much more comfortable in these boots than any others. Thermoplastic polyurethane is a miracle material which occupies the space somewhere between plastic and rubber. It’s flexible, strong, and has a good grip. It is most often found adorning work boots as a bumper along the heel or toe, but many models use it for their outsoles, as well. PVC Durability-wise, these work boots will give you a sole that’s pierce-, slip,- and heat-resistant; simply put — these boots will last. The shaft covers the instep of the foot, and is typically where the lacing eyelets connect to the boot. Safety boots aren’t just a nice thing to have, they’re often a requirement at the workplace. And no manufacturer knows the demands of the workplace better than DeWALT.

If you’re looking for a secure fit, Poseidon’s got it. There’s plenty of heel support and padding around the ankle, further secured by a tough YKK side zipper and leather collar strap. Even the steel toe cap features an ergonomic design which doesn’t crowd or pinch your toes. And despite all the fittings and durable materials, Poseidon is surprisingly breathable inside, making it the ideal choice for all-day wear. DeWalt Poseidon at a glance The first thing you’ll notice is there’s a big focus here on comfort. Unlike the cheap work boots that flood the UK market, both the collar AND the tongue of the Dewalt Titaniums are padded. If you’re looking for a true all-rounder, the Dewalt Titanium safety boots (with steel toe caps) are a good place to start. Almost all of our deliveries are made with DPD who offer a fantastic delivery service. Their delivery success record is well respected and in our experience the best available. The review covers a range of boots from the top brands, focusing on durable, comfortable, and hard-wearing safety boots with steel toes caps. We’ve also offered up a recommendation for a good work boot specifically designed for women (#10 on this list).Personalised Items are non-returnable. Some goods are non-returnable for hygiene reasons. Please note that this does not affect your statutory rights. If you’ve got wide feet, it is recommended to size up, as DeWalt’s Builder is a bit narrow at the toes. These men’s workboots are so lightweight and slimline, there’s a good chance they’ll be mistaken for trainers. But on top of the sleek aesthetics, you’ll also get plenty of protection, like a steel toe cap that’s S3-rated. What’s more, these work boots come with a durable midsole that’s reinforced to guard your foot. On its own merits, the Builder is a great safety boot. However, its name is somewhat misleading, as actual builders really require a steel midsole. The EVA midsole just isn’t going to withstand a nail puncturing through, which can be a real deal breaker. It does have a steel toe, so there’s still protection from a vast array of crushing hazards; but the midsole is something to think about.